Driver FixRecommendedSound, Wi-Fi or graphics acting up? Check drivers firstFind missing or outdated drivers fast.Check DriversBlack Friday PreviewAmazon USBlack Friday preview: compare before the rush hitsAmazon US: current deals, useful picks and tech finds.Check DealsClean PCRecommendedOne scan can reveal what keeps slowing WindowsLook for cleanup and repair opportunities.Run Scan×
Skip to the story
WATCHRANKER
bracelet care

How to Care for Gemstones and Precious-Metal Watch Bracelets

Free tools Windows power users keep installed

One-click scans. No signup required.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.

The safest routine is simple: wipe the watch with a clean microfiber cloth, and only use lukewarm water, mild non-detergent soap and a very soft brush when the crown is fully secured, the watch’s water-resistance condition is known and the gemstone treatment is suitable. Keep chemicals, heat, shocks and ultrasonic cleaners away from treated, porous, organic or unidentified stones. Rinse sea-exposed watches with fresh water, dry them carefully, store each piece separately and leave polishing, setting checks and water-resistance work to a qualified professional.

Gemstone watches need two kinds of care at once. The stones may have treatments that react badly to vibration or heat, while gold and platinum scratch and wear more readily than many gems. The method below separates what is generally safe at home from the situations that require a jeweler or watchmaker.

As an Amazon Associate I earn from qualifying purchases.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

What is the safest way to clean a gemstone watch bracelet?

Start with dry cleaning. A microfiber cloth removes fingerprints, skin oil and loose dust without adding moisture to the case or joints. Wet cleaning is appropriate only after you have identified the stones and treatments, inspected the setting and confirmed that the crown and seals are in suitable condition.

Use this decision check before adding water

  • Stone and treatment known: You know whether a stone is fracture-filled, cavity-filled, dyed, coated, oil-treated, resin-treated or otherwise enhanced.
  • Setting sound: Prongs, bezels, clasp and bracelet links are intact, with no loose stone, bent component or opening at a joint.
  • Crown secured: A screw-down crown is fully screwed home, or the manufacturer’s instructions specifically permit the proposed cleaning method.
  • Water resistance appropriate: The model’s rating is known and there is no reason to suspect an old, damaged or untested seal.

If any answer is no, use a dry or barely damp cloth and arrange a professional inspection. Water resistance is not a permanent promise: seals age, crowns can be left open and a watch can be damaged by an impact even when it previously passed a pressure test.

Popular on Amazon
Sale
MagicFiber Microfiber Cleaning Cloth, Glasses Cleaner, Eyeglass Wipes, 6pk | Clean Eye Glasses, Lenses, Screens, Cameras, Sunglasses, Watches, Electronics, & More
  • Glasses cleaner - Sourced from the highest quality microfiber that absorbs and removes dust, oil, smudges, fingerprints, dirt, and more. Leaves no scratches, streaks, marks, or lint behind. The perfect eyeglass cleaner for reading glasses, women, men, adults, him, her, teens, and more.
  • Screen cleaner: Our Microfiber cloth accommodates all your screen cleaning needs. It's the perfect eyeglass cleaning cloth, glasses wipes, glass cleaning cloth, lens cleaning cloth, screen cleaning cloth, and even tv cleaning cloth.
  • Quality protection: Each MagicFiber lint free cloth comes in its own polybag so that they are always new and ready to use. Includes MagicFiber Microfiber Cleaning Cloth (5 black, 1 grey) 6 x 7 inches (15cm x 18 cm).
  • Designed for all products: The delicate craftsmanship of our Microfiber Cleaning Cloth allows for the most versatile use cases. It can be used on any delicate surface such as LCD, OLED, laptop, phone, car, tablet, dvd, mirror, glass, glasses, cameras, lenses, gaming, toys and more!
  • MagicFiber: Magical results for the things you care about most

Why microfiber is the best everyday option

Rolex’s care guidance says that occasional microfiber-cloth cleaning helps preserve a watch’s lustre. A clean, high-quality cloth lifts oil without the abrasive particles that can be trapped in paper towels or household rags. Use a separate cloth for the case and bracelet, and replace or wash it when it collects grit. Never rub visible sand across polished metal; blow or brush loose particles away first.

How do I clean a gemstone and precious-metal bracelet step by step?

For an approved watch, the following routine keeps water exposure controlled and prevents a loose stone from disappearing down a drain.

Free tools Windows power users keep installed

One-click scans. No signup required.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
  1. Identify the materials. Record each gemstone and ask the retailer, maker or qualified gemologist whether it is fracture-filled, cavity-filled, dyed, coated, oil- or resin-treated, heat-treated or otherwise enhanced. A GIA report can record detectable treatments, but absence of a report does not prove that a stone is untreated.
  2. Inspect before cleaning. Under bright light, look for movement, a gap under a stone, a lifted prong, a loose bezel, a damaged clasp or a link that binds. Do not wet-clean a watch with any of these symptoms. After a knock, have the setting checked even if the stone still appears to be in place.
  3. Secure the crown. Close and fully screw down the crown before the watch goes near water. Do not operate pushers or a crown while the case is wet, and do not assume that a chronograph or dive rating makes a damaged watch safe to submerge.
  4. Prepare a controlled basin. Fill a bowl or glass with lukewarm water. A basin is safer than an open sink because a loosened stone or spring bar cannot vanish down the drain. Place a soft towel underneath the container to reduce impact risk.
  5. Add mild soap. Use a small amount of mild dish soap without detergents or abrasive additives. GIA’s general colored-gem guidance is warm water, mild dish soap with no detergents and a soft brush; a treatment-sensitive watch may still require cloth-only cleaning.
  6. Brush gently. With a very soft jewelry brush, work around bracelet links, the underside of the case and the setting. Let the bristles do the work; do not force them into a clasp, pry at a bezel or scrub across a stone’s edge. Firm toothbrush bristles can scratch precious-metal settings.
  7. Rinse away from the drain. Rinse in a second bowl or glass of clean water. Fresh water removes soap without the pressure and distraction of a running tap.
  8. Dry completely. Pat the watch with a lint-free or microfiber cloth, then let moisture evaporate in a cool room. Do not use a hair dryer, radiator, heat gun or compressed air to drive water out of joints.
  9. Recheck the result. Inspect the clasp, links and stones again. If a stone moves, a gap appears or moisture is visible under the crystal, stop wearing the watch and seek service.

Can I use an ultrasonic cleaner on a gemstone watch?

Usually, no. Ultrasonic vibration can loosen settings, chip a stone’s girdle or worsen an existing fracture. It is particularly unsafe when the treatment, filler or structural condition is unknown. A professional may choose ultrasonic equipment for a specific, verified material, but that decision belongs to the person who has identified the stone and inspected the setting.

Never put these materials in an ultrasonic cleaner

  • Pearl, coral, amber and ivory
  • Opal, turquoise, lapis lazuli and malachite
  • Fracture-filled, cavity-filled, dyed or coated stones
  • Oil- or resin-treated stones, including many emeralds
  • Any stone with an unknown treatment history
  • A watch with a loose stone, damaged clasp, bent prong or uncertain water resistance

Hardness does not make ultrasonic cleaning automatically safe. Diamonds and other hard gems can have cleavage planes, inclusions or fracture filling, and vibration can damage the setting holding them. A ruby or sapphire may tolerate ordinary gentle cleaning, yet a filled or dyed example still needs a more conservative method.

How should I clean ruby and sapphire watch settings?

Ruby and sapphire are corundum and rank 9 on the Mohs hardness scale. GIA describes ordinary corundum as having excellent toughness, so warm soapy water and a very soft brush are generally suitable when the stones are sound and untreated or their treatment is known to be stable.

When warm soapy water is reasonable

Use the step-by-step routine when the ruby or sapphire has no vulnerable filling or coating, the setting is secure and the watch’s crown and seals are in good condition. Brush behind the stones rather than pushing across their edges, where dirt can conceal a loose prong.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

When to use a damp cloth only

Fracture-filled, cavity-filled and dyed corundum should be treated as vulnerable. Wipe the surface with a soft, slightly damp cloth, then dry it. Do not use ultrasonic vibration, steam, solvents or sudden temperature changes unless the stone’s maker or a qualified gemologist has specifically cleared that method.

Also popular on Amazon
30 Pack Microfiber Cleaning Cloths, Glasses Cloth,Eyeglass Cloth,Lens Wipes
  • 30-pack of ultra-soft cleaning cloths (29 grey and 1 white) made of high-quality tightly woven microfiber material
  • Each cloth measures 6 x 7 inches (15cm by 18cm)
  • Contain no harsh chemicals
  • Lint-free and streak-free performance saw-tooth pattern edges prevent fraying, ensuring no coarse strings (won’t scratch surfaces)
  • Machine washable and reusable

How should I clean an emerald watch?

Emeralds require more restraint than their appearance suggests. Natural inclusions can make them sensitive to shock, and oil or resin treatments can be disturbed by heat, solvents, steam or ultrasonic vibration. Favor a soft, damp cloth and keep the watch away from direct sun, saunas, steam baths and rapid temperature changes.

Do not soak an emerald watch merely because the case carries a water-resistance rating. Water may not be the main risk; the treatment and inclusions are. If grime is trapped around the setting, have a professional identify the treatment and clean it with a method chosen for that individual stone.

How do I care for pearls, coral, amber and other porous gems?

Organic and porous materials absorb or react to substances that ordinary corundum can tolerate. Clean them with a soft, moist cloth, dry them promptly and keep perfume, cosmetics, alcohol and household cleaners away from the piece.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Pearl, coral and amber

These materials should not go into an ultrasonic cleaner. Put on perfume, hairspray and cosmetics before the watch, allowing those products to dry, and remove the watch before applying more. A cloth removes surface residue without forcing liquid into pores or between layers.

Opal, turquoise, lapis lazuli and malachite

These stones can be sensitive to heat, chemicals or rapid environmental changes. Avoid soaking, steam and harsh solutions; use a barely damp cloth and dry immediately. If the stone is heavily soiled, ask a jeweler rather than escalating to a stronger cleaner.

Diamonds and other hard stones

A high hardness number means resistance to scratching, not immunity from chipping. Cleavage, inclusions and fracture filling can reduce durability, and an impact can loosen the metal around a stone. Keep the same inspection and shock precautions even when the stone itself is very hard.

What cleaners and tools should never touch the watch?

Do not use chlorine bleach, harsh ammonia cleaners, household solvents, corrosive products, perfume, alcohol or cosmetics on or near the watch. These substances can discolor gold or other alloys, attack finishes and harm delicate or porous stones. Do not mix cleaning chemicals, and never use a product simply because its label says it is safe for “jewelry” without checking the specific gemstone and treatment.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Also popular on Amazon
Sale
MagicFiber Microfiber Cleaning Cloth, Glasses Cleaner, Eyeglass Wipes, 2pk | Clean Eye Glasses, Lenses, Screens, Cameras, Sunglasses, Watches, Electronics, & More
  • Glasses cleaner - Sourced from the highest quality microfiber that absorbs and removes dust, oil, smudges, fingerprints, dirt, and more. Leaves no scratches, streaks, marks, or lint behind. The perfect eyeglass cleaner stocking stuffers for adults, men, women, him, her, teens, and more.
  • Screen cleaner: Our Microfiber cloth accommodates all your screen cleaning needs. It's the perfect eyeglass cleaning cloth, glasses wipes, glass cleaning cloth, lens cleaning cloth, screen cleaning cloth, and even tv cleaning cloth.
  • Quality protection: Each MagicFiber lint free cloth comes in its own polybag so that they are always new and ready to use. Includes MagicFiber Microfiber Cleaning Cloth (1 black, 1 grey) 6 x 7 inches (15cm x 18 cm).
  • Designed for all products: The delicate craftsmanship of our Microfiber Cleaning Cloth allows for the most versatile use cases. It can be used on any delicate surface such as LCD, OLED, laptop, phone, car, tablet, dvd, mirror, glass, glasses, cameras, lenses, gaming, toys and more!
  • MagicFiber: Magical results for the things you care about most
  • Ultrasonic machines: Avoid for vulnerable, treated or unknown stones and for any compromised setting.
  • Steam cleaners: Heat and pressure can damage treatments and drive moisture into a case or bracelet.
  • Firm toothbrushes and abrasive pastes: They can scratch softer precious-metal settings and remove surface finishes.
  • Rapid heat or cold: Thermal shock can stress inclusions and treated stones.
  • Running-water rinses over an open sink: A loosened stone, spring bar or clasp part can be lost.

Can I wear a gold or platinum watch in the shower or ocean?

Do not use a generic “waterproof” assumption. Follow the model-specific rating, keep the crown fully secured and consider the age and condition of the seals. A rating describes resistance under specified conditions; it does not override a loose crown, damaged gasket or an impact that has compromised the case.

Water-resistance examples

Watch category Published rating How to interpret it
Rolex Oyster Perpetual wristwatches At least 100 metres Applies to the specified Oyster Perpetual models, provided the case and seals are in proper condition.
Rolex Perpetual 1908 50 metres A lower model-specific rating; it is not a general permission for every activity.
Some Rolex Oyster models 1,220 or 3,900 metres These figures apply only to the models designed and rated for them.

Even when a watch is designed for water, showering adds hot water, soap and abrupt temperature changes. Sea water adds salt and sand. After approved sea exposure, rinse the closed, water-resistant watch with fresh water to remove residue, then dry it. Never press pushers or unscrew the crown while wet.

Gold and platinum themselves can be cleaned with soapy water, but the complete watch is more than its metal. Gem treatments, seals, crystal construction and bracelet joints determine whether wet cleaning is appropriate. When the rating or seal condition is unknown, keep the watch dry and arrange a pressure and seal check.

How do I remove scratches from a gold or platinum bracelet?

Do not try to erase deep scratches with aggressive hand polishing. Precious metal is removed every time it is polished, and over-polishing can blur edges, alter brushed and mirror surfaces, soften engraving and change the fit of bracelet components.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

For light fingerprints or surface film, use a microfiber cloth. A jeweler or the manufacturer’s service center should handle deeper scratches, dents, stretched links and refinishing. Rolex states that professional polishing of its case and bracelet should be performed only by an Official Rolex Service Center. The same principle applies broadly: polishing should match the original geometry and finish, not simply make one area shiny.

White-gold considerations

White gold may rely on rhodium plating for its bright appearance. Repeated polishing can remove that layer, and restoring the color may require professional cleaning, preparation and replating. Do not use an abrasive “shine” cloth on a plated surface unless the maker has approved it.

How do shocks affect gemstone settings?

A fall or hard impact can loosen a stone without leaving an obvious mark. The metal around the stone may bend, a prong may lift or a bezel may develop a gap. Bvlgari advises having the setting checked after a shock or hit; that inspection is prudent even when the watch still runs normally.

Also popular on Amazon
SmoTecQ 6 Pack Premium Microfiber Glasses Cleaning Cloths - Ultra Soft & Scratch Free for Eyeglasses, Sunglasses, Camera Lenses, Tablets & Screens - Washable & Reusable
  • VALUE PACK OF 6: Includes 6 premium microfiber cleaning cloths (7x6 inches)—4 Black + 2 Gray—perfect for daily use, home, office, or travel.
  • POWERFUL & SCRATCH-FREE CLEANING: SmoTecQ ultra-soft microfiber effectively absorbs and quickly removes fingerprints, smudges, dust, oil, and dirt without leaving scratches or residue.
  • TRAVEL-FRIENDLY & INDIVIDUALLY PACKED: Each cleaning cloth is individually wrapped in a protective polybag, ensuring they stay clean and ready-to-use, ideal for purses, backpacks, glasses cases, or on-the-go convenience.
  • SAFE FOR ALL SURFACES: Perfectly cleans eyeglasses, sunglasses, camera lenses, telescopes, smartphones (iPhone/Android), tablets (iPad), TVs, mirrors, car screens, VR headsets, and other delicate surfaces without streaks.
  • WASHABLE & COST-SAVING: Durable and reusable—each microfiber cloth can be hand-washed in warm water with mild soap (air dry), maintaining peak cleaning performance for over 500 washes, saving money and reducing waste.

What to do immediately after an impact

  1. Remove the watch and hold it dial-up so a loosened stone is less likely to fall.
  2. Do not shake it, press the stone back into place or continue wearing it during exercise.
  3. Inspect the clasp, spring bars, bezel and visible prongs under good light.
  4. Place the watch in a padded pouch or its box, separately from other jewelry.
  5. Arrange a setting inspection and, if the impact was substantial, a water-resistance check before exposing it to water.

How should I store a gemstone and precious-metal watch?

Store each watch alone in its original box, a soft pouch or a padded compartment. Separate storage prevents one stone from scratching another and keeps bracelet edges from marking polished metal. Keep the container cool, dry and away from direct sun, bathroom humidity, heaters and chemical vapors.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
  • Close the clasp so loose bracelet links do not swing into the case.
  • Do not stack watches face-to-face or place hard jewelry on top of them.
  • Keep treated and porous gems away from solvents, perfume and cosmetics even when they are inside a jewelry drawer.
  • For long-term storage, check periodically for moisture, tarnish, a deteriorating pouch or a strap and clasp that have become brittle.

When transporting the watch, use a rigid, padded case rather than a loose pocket. Keep documentation about the stone, treatments and last service with the watch; it helps the next professional choose a safe cleaning method.

Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Support on Ko-Fi

How often should a luxury watch be cleaned and serviced?

There is no universal home-cleaning interval. Wipe the watch whenever fingerprints or residue appear, and wet-clean only when the material and watch condition have been confirmed. A professional should clean the piece when dirt is trapped in inaccessible joints, when the setting needs inspection or when the case requires refinishing.

Guidance Published interval Important qualification
Boucheron full watch service Every three to five years Brand guidance; actual need depends on model and use.
Rolex full service Approximately every 10 years Rolex says the interval depends on model and real-life use.
Setting and jewelry checks Periodic checks; annual boutique checks are recommended by Bvlgari Have the setting checked sooner after a shock, visible damage or a loose stone.

These are brand recommendations, not a rule for every watch. Heavy swimming, perspiration, salt exposure, frequent impacts or an older watch with unknown seal history can justify earlier attention. A service normally includes more than washing: the professional may inspect the movement, gaskets, crown, bracelet wear, stone security and water resistance.

Which home supplies are appropriate?

Keep a small, dedicated kit rather than reaching for bathroom or kitchen chemicals.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
  • Clean microfiber or other lint-free cloths
  • A bowl or glass reserved for controlled rinsing
  • Mild, non-detergent soap approved for the identified materials
  • A very soft jewelry-cleaning brush
  • A soft towel to cushion the work surface
  • A padded pouch or compartment for separate storage

Label the kit and keep it away from abrasive compounds, metal polishes, bleach and solvent sprays. Replace a cloth that has picked up grit; a dirty cloth can create the scratches it is meant to prevent.

When should a professional clean or repair the watch?

Choose a qualified watchmaker, the manufacturer’s service center or a jeweler with gemstone-treatment expertise when the stone identity is uncertain, the setting has moved, the watch has suffered a shock, water has entered the case, scratches are deep or the bracelet needs polishing.

Also popular on Amazon
Koala Lens Cleaning Cloth | Japanese Microfiber | Black & Green (Pack of 6)
  • UNPARALLELED CRYSTAL-CLEAR PERFORMANCE: The only obsessively engineered, best-in-class microfiber cleaning cloth, meticulously crafted from proprietary, ultra-dense, super-absorbent Japanese woven fabric, effortlessly absorbing the toughest dirt, grime, and oils - leaving your lenses spotless - every time.
  • WHAT'S IN THE PACK: Six 6 x 7 inch lint-free Japanese microfiber cloths in a dense honeycomb weave, sized for eyeglasses, sunglasses and phones. For laptops, tablets and monitors, choose the 12 x 12 inch XL 3-pack.
  • SAFE ON COATED LENSES AND SCREENS: For anti-reflective, blue light and polarized lenses, camera lenses, phone, tablet and laptop screens, smart glasses, VR/AR headsets, binoculars and telescopes.
  • UNRIVALED DURABILITY KEEPS ON CLEANING: Washable and reusable dozens of times each, our performance cleaning cloth outperforms other reusable and disposable alternatives, reducing waste, while maximizing value. Simply wash by hand with cold water and mild soap, then hang to air dry!
  • JOIN THE KOALA FAMILY – INTEGRITY MATTERS: When you choose Koala, you're joining a thriving community of millions who rely on us for their precision lens and device care needs. We believe lenses and screens have integrity too, and deserve supercharged, long lasting performance. We exist to serve that vision.

Ask these questions before handing it over

  • Will you identify or document the gemstone treatments before selecting a cleaning method?
  • Will the stones, prongs, bezels, clasp and bracelet joints be inspected separately?
  • Is pressure testing included after the crown, crystal or seals are disturbed?
  • Will polishing preserve the original brushed, satin and mirror finishes?
  • How will the watch and loose stones be protected while it is in transit or awaiting work?

Request a written condition report for valuable or heavily set pieces. It should note visible scratches, missing stones, treatment disclosures, bracelet stretch and any existing water-resistance limitation so later changes are easier to identify.

What is the practical care routine for everyday wear?

A few habits prevent most avoidable damage without over-cleaning the watch.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
  1. Put on perfume, hairspray, sunscreen and cosmetics before the watch, and let them dry.
  2. Remove the watch for contact sports, weight training, gardening and work that can strike or scrape the bracelet.
  3. Wipe perspiration and fingerprints with a microfiber cloth at the end of the day.
  4. Keep the crown closed and avoid manipulating it in wet conditions.
  5. After permitted sea exposure, rinse with fresh water and dry thoroughly.
  6. At each wipe, look for a moving stone, lifted prong, loose clasp or link that binds.
  7. After any impact, stop wearing the watch until the setting and water resistance have been checked.

This routine distinguishes cosmetic upkeep from structural work. A clean-looking bracelet can still have a weakened clasp or seal, and a dull-looking surface may need only a cloth rather than abrasive polishing.

Frequently Asked Questions

How can I tell whether a gemstone is fracture-filled or coated?

Start with the purchase paperwork, laboratory report and service records, then ask a qualified gemologist to examine the stone under magnification. Visual inspection at home cannot reliably distinguish every filler or coating, and an unknown treatment should be handled as sensitive rather than tested with heat, chemicals or ultrasound.

What should I do if I see condensation under the crystal?

Stop wearing the watch, keep the crown closed and do not apply heat to evaporate the moisture. Place it in a dry padded container and arrange prompt service; condensation can indicate a failed seal or water entry that may damage the movement and treatments.

Is a jewelry polishing cloth safe for a white-gold watch?

Only if the manufacturer or service professional confirms that it is non-abrasive and suitable for the finish. Many white-gold watches use rhodium plating, and an abrasive cloth can thin or remove that layer instead of merely removing fingerprints.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

How should I insure or document a gemstone watch before service?

Photograph the dial, case, clasp, bracelet and each visible stone in good light, and keep the appraisal, laboratory report and service receipt together. Note existing scratches, chips and treatment disclosures so the service provider and insurer have a dated condition record.

Can a loose stone be glued back at home?

No. Household adhesives can stain a stone, block a proper setting repair and complicate later cleaning or polishing. Keep the watch still in a padded box and have a professional reset and inspect the stone.

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply. Prices as of November 14, 2026 5:56 pm GMT+0530.

bracelet caregemstone watchesgold watchesjewelry cleaningPlatinum watcheswatch care

Leave a Reply

Your email address will not be published. Required fields are marked *

What’s actually slowing this PC down?

Pick the symptom - the matching free tool is one click away.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Recommended PC Tool
Recommended PC Tool
Windows Errors? Fix Them Before They SpreadFree repair scan
Crashes, No Sound, or Screen Glitches?Free driver scan

Two free Windows tools

One Free Minute Could Fix That PC

Before you go - each of these free tools takes about a minute and tackles what quietly slows a Windows PC down.

Special offer. View Outbyte info, uninstall instructions, EULA, and Privacy Policy.