Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
To use a tachymeter, reset the chronograph, time a known one-kilometre or one-mile distance, stop the chronograph at the finish, and read the tachymeter number beside the chronograph seconds hand. That number is an approximate hourly rate: kilometres produce km/h and miles produce mph. A conventional scale is designed for intervals shorter than one minute, and distances other than one unit require proportional adjustment.
The chronograph is the watch’s stopwatch function. Its pushers start, stop and reset elapsed time, while the tachymeter scale converts that elapsed time into a rate. Exact pusher layout, hand behavior, scale location and operating range vary by movement, so the model manual takes priority over any generic diagram.
As an Amazon Associate I earn from qualifying purchases.
PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchWhat are a chronograph and a tachymeter?
A chronograph is a timepiece with a stopwatch function built into the normal time display. Pressing its control starts elapsed-time measurement; pressing it again stops the measurement; a reset control returns the chronograph hands to zero. Many watches use two pushers, but some designs use a single control or a different sequence. Check the instructions for the specific caliber before timing anything.
A tachymeter is a numbered scale, usually printed around the outer bezel or on a ring around the dial. It is a visual calculator: it relates a measured time interval to an hourly rate. As TAG Heuer’s watch guidance puts it, the scale determines speed from time. The scale does not measure distance by itself and does not replace a properly measured course.
Popular on Amazon
- CLASSIC DESIGN: 45MM beautiful and exquisite big face with three functional subdials and date display, tachymeter numerals on the bezel, with a classic stainless steel bracelet, Quality quartz analog movement and long-life battery, provide precise time and perfectly match any of your outfits, Benyar analog wrist watch embodies the pursuit of fashion and quality that redefines time!
- QUALITY AND COMFORTABLE: High quality imported quartz movement to provide high stability and accurate timing. 304 steel case with mineral glass, which greatly improves the wear resistance and scratch resistance. Mens stainless steel watches not only looks elegant and luxurious, but is also comfortable and breathable to wear. BENYAR men's wrist watches will stand the test of style and last a lifetime if properly maintained.
- WATERPROOF CHRONOGRAPH WATCH: Multifunctional sub-dial can be used as timers (1/10 Second, Second and Minute Chronographs). BENYAR's waterproof chronograph watches for men is waterproof 30M/3ATM, can withstand sweat, accidental rain or water splash (Showering, swimming, immersion in water is not recommended). After absorbing enough light energy to have a certain glow-in-the-dark effect in dark environments. It is a multifunctional stainless steel watches for men.
- READY FOR GIFTS: Fashion and casual watches suitable for men and youth, perfect for everyday wear and any occasion, Providing accurate timekeeping and becomes a fashion statement for your versatile style. Packaged in a exquisite box, this luxurious stainless steel watch it is an ideal gift for yourself, friends, classmates, father, lovers, family for Graduations, Birthdays, Father's Day, Valentine's day, Thanksgiving ect.
- CUSTOMER SERVICE: BENYAR watch men provides a 2-year after sales service. BY BENYAR is committed to offering a range of classic high quality designer wrist watches for men and high standards of customer service. If you have any questions about our watch men, please contact us first via email and we will provide you with a satisfactory solution within 24 hours.
On a typical analog chronograph, the long central hand that sweeps when the stopwatch runs is the chronograph seconds hand. A smaller hand elsewhere on the dial may be the continuously running seconds display and is normally not the hand to use. Some models reverse those arrangements, so identify the correct hand in the manual rather than relying on appearance.
Which hand should I read?
Read the hand that records chronograph seconds, not automatically the small running-seconds hand. With the chronograph stopped, look for the hand that moved from zero during the timed event and locate the tachymeter graduation directly opposite its tip.
Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Clear out junk files and repair common Windows errors3Scan for outdated or missing drivers - takes under a minuteHow to identify it
- Start the chronograph briefly while the watch is stationary and observe which hand begins moving.
- Confirm that hand’s identity and the pusher sequence in the movement’s manual.
- Check whether the scale is on the bezel, a fixed inner chapter ring or another printed ring; use the graduations aligned with the chronograph-seconds hand.
- Do not read a sub-dial hand simply because it is marked in seconds. A sub-dial can show ordinary running seconds or elapsed minutes rather than the tachymeter’s input.
Some chronographs use a central hand for elapsed seconds and sub-dials for elapsed minutes or hours. If the event lasts longer than the scale’s intended interval, those sub-dials can help record the duration, but the conventional tachymeter reading itself is based on the seconds interval shown by the scale.
How do I use a tachymeter to measure speed?
Use a course whose length is known in advance. For a direct reading, choose exactly one kilometre or one mile, mark the start and finish clearly, and time the moving object as it covers that distance.
- Read the manual first. Confirm which pusher starts and stops the chronograph, which control resets it, and which hand is the chronograph seconds hand. The crown and pushers must be in the normal operating position specified for that model.
- Reset to zero. Press the reset control until all chronograph hands return to their zero positions. A hand that is already part-way around the dial will give a wrong result even if the timing technique is perfect.
- Choose and measure the course. Use one kilometre for a km/h result or one mile for an mph result. The two markers should be fixed and measured before the attempt; estimating the distance while timing introduces a second source of error.
- Start at the first marker. Press the start/stop pusher at the instant the object crosses the start point. Aim for a repeatable visual reference, such as the front of a vehicle crossing a line.
- Stop at the second marker. Press the same pusher when the same reference point reaches the finish marker. The elapsed interval is the time for one distance unit.
- Read the scale. Find the number opposite the chronograph seconds hand. On a one-kilometre course that number is an approximate km/h rate; on a one-mile course it is an approximate mph rate.
- Record before resetting. Write down the reading while the hand is stopped. Pressing reset before recording erases the position you need.
Example: a 45-second kilometre
If the chronograph hand reaches the graduation marked 80 after a 45-second kilometre, the estimated speed is 80 km/h. Seiko uses this relationship in its explanatory material. The result is an average over that kilometre, not an instantaneous speed at the start or finish.
Example: a 30-second mile
If a one-mile course takes 30 seconds, the scale reads 120. Because the course was one mile, the unit is 120 mph. The same printed number would represent km/h if the timed course were one kilometre instead.
What does each tachymeter number mean?
For one distance unit, the scale represents the number of such units completed in an hour. The underlying calculation is:
Hourly rate = 3,600 seconds ÷ elapsed seconds for one distance unit.
There are 3,600 seconds in an hour. A shorter elapsed time therefore produces a larger number, while a longer time produces a smaller number. The scale prints common results so you can read them without doing the division at the roadside or track.
| Elapsed time for one unit | Scale result | Interpretation |
|---|---|---|
| 30 seconds | 120 | 120 km/h for 1 km, or 120 mph for 1 mile |
| 45 seconds | 80 | 80 km/h for 1 km, or 80 mph for 1 mile |
| 60 seconds | 60 | 60 km/h for 1 km, or 60 mph for 1 mile |
The table follows the 3,600-second relationship and the examples published by Seiko. The number is a rate in the same distance unit used for the course; the scale does not convert kilometres to miles.
Free tools Windows power users keep installed
One-click scans. No signup required.
Can I use a tachymeter for distances other than one kilometre or one mile?
Yes, but the direct reading must be multiplied or divided in proportion to the distance. The scale assumes that the number you read corresponds to one distance unit. If the timed course contains more units, multiply; if it contains a fraction of a unit, divide by that fraction’s denominator.
Two kilometres or two miles
Suppose the hand points to 80 after 45 seconds, but the measured course is two kilometres. Multiply 80 by 2: 80 × 2 = 160 km/h. The same operation applies to two miles, giving 160 mph, provided the one-mile equivalent was timed in the same way.
Half a kilometre or half a mile
If the hand points to 80 after timing 500 metres, divide by 2: 80 ÷ 2 = 40 km/h. For a half-mile course, the result is 40 mph. Casio describes these proportional adjustments for two-unit and 500-metre measurements, and Timex describes multiplying when more than one kilometre or mile is covered during the usable interval.
Also popular on Amazon
- Men's luxury timepieces with technical advancements and a sporty style
- 1 Second Chronograph Measures up to 60 Minutes, 12/24 Hour Time, Date
- Silver-Tone Stainless Steel Case
- Mineral Crystal
- 100 Meters Water Resistant and 5 Year Limited Warranty
Any measured distance
Use the general relationship when the distance is not a simple fraction:
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Rate = (3,600 ÷ elapsed seconds) × distance in units.
For example, if a measured 1.5-kilometre course takes 45 seconds, first read 80 for one kilometre, then multiply by 1.5 to obtain 120 km/h. The distance must be measured reliably, and the result remains an approximate average.
How long can a conventional tachymeter measure?
Conventional scales are intended for elapsed times under 60 seconds. Casio describes the normal one-kilometre tachymeter measurement as occurring within 60 seconds, and manufacturer guidance from Seiko and ALBA uses the same one-minute convention. At exactly 60 seconds the scale corresponds to 60 units per hour; beyond that point, many printed scales no longer provide a direct graduation.
A course can still be timed with the chronograph when it takes longer than a minute, but the standard tachymeter ring may not support a direct reading. Some specialized watches use different scales or multiple rotations, while others simply require the formula rather than the bezel. Do not assume that a number beyond the printed operating range is meaningful; consult the movement instructions.
Quick wins for a faster PC:
Repair Windows errors before they cause bigger problemsFix Now →Scan for outdated or missing drivers - takes under a minuteDriver Scan →Clear out junk files and repair common Windows errorsFree Scan →Can the same scale measure jobs or products per hour?
Yes. Replace distance with one completed job or product. Start when one unit of work begins, stop when it is complete, and read the tachymeter number as units per hour, as long as the task fits the scale’s timing range.
Production example
If one product takes 20 seconds, the scale reads 180. Seiko gives this as 180 products per hour, and ALBA describes the same operation-rate method. This is a theoretical rate based on repeating that cycle continuously; it does not account for breaks, changeovers, defects or other downtime.
Service-task example
A repair shop could time one standardized operation and interpret the reading as jobs per hour. The task must have a clearly defined start and finish, and the result should be treated as an estimate of capacity rather than a promise of actual output across a full shift.
What should I check before trusting the reading?
Use this checklist each time you set up a measurement:
- Zero position: all chronograph hands return to their marked zero before starting.
- Correct control: the manual confirms which pusher starts and stops and which one resets.
- Correct hand: the hand you read is the chronograph seconds hand identified for that caliber.
- Known distance or task: markers or the work definition are fixed before timing.
- Matching units: kilometres produce km/h, miles produce mph, and jobs produce jobs per hour.
- Usable interval: the event falls within the scale’s stated operating range, normally under 60 seconds.
- Reading captured: the number is recorded before the reset pusher is pressed.
- Repeatability: the same start reference and finish reference are used if you take another measurement.
Scale placement, graduation spacing, hand resolution and operating range differ among models. A narrow graduation can make an exact-looking number difficult to judge, especially when the hand falls between marks. The manufacturers cited for this guide do not publish one universal accuracy tolerance for all tachymeter watches, so treat the result as approximate and follow the instructions for the particular movement.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Why might my tachymeter reading be wrong?
The wrong hand was read
The most common mistake is reading the continuously running seconds hand or an elapsed-minutes sub-dial. Start and stop the chronograph while watching the hands, then verify the hand designation in the manual.
The chronograph was not reset
If the hand began from a non-zero position, the displayed graduation does not represent the measured interval. Reset fully before every attempt. If the hand does not return to zero, use the model’s hand-alignment procedure rather than compensating mentally.
The markers were poorly defined
Starting a fraction early or stopping a fraction late changes the elapsed time, and the error is more visible on short courses. Place clear markers, use the same reference point on the moving object, and avoid timing a distance that was only estimated.
The Tool Desk
Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Also popular on Amazon
- CHRONOGRAPH FUNCTION: Features a precise chronograph movement with three sub-dials for accurate timekeeping and elapsed time measurement.
- TACHYMETER BEZEL: The bold black tachymeter bezel allows you to calculate speed and distance, adding a sporty and professional look.
- WATER RESISTANT: Rated WR 3ATM, this watch can withstand splashes and brief water exposure, making it suitable for everyday wear.
- COMFORTABLE SILICONE STRAP: The durable black silicone strap provides a secure, comfortable fit for all-day wear in any setting.
- DATE DISPLAY & BOLD DESIGN: Includes a convenient date window and a striking black dial with luminous hands for easy readability day or night.
The unit was mismatched
A reading of 80 after one kilometre is 80 km/h, not 80 mph. Conversely, a one-mile course produces mph. Convert the distance or use a separate calculation only after recording the correct unit-based result.
The event exceeded the scale’s range
If the interval was longer than the printed tachymeter range, the number opposite the hand may not be a valid direct rate. Use the formula with the measured seconds and distance, or follow a model-specific extended-scale instruction.
The watch was operated incorrectly
Some chronographs have unusual pusher sequences, safety locks or restrictions on operating controls under water. Follow the manual’s operating instructions; forcing a control or using it outside its specified conditions can damage the mechanism.
What is the difference between a tachymeter reading and instantaneous speed?
A tachymeter gives an average rate over the timed distance or task. It cannot show acceleration, braking or the speed at a particular instant. A vehicle that speeds up and slows down could produce the same average reading as one that travels steadily, because both take the same total time over the measured course.
The result is also sensitive to the exact start and finish moments. For practical use, choose a course long enough to make those timing uncertainties small while still staying inside the watch’s usable scale range.
How should I reset and store the chronograph after measuring?
After recording the result, press the reset control specified by the manual and confirm that the chronograph hands return to zero. Leave the crown in its normal position and close any pusher guards or locking rings as instructed. Do not press reset while the chronograph is running unless the manufacturer explicitly permits that operation; many conventional mechanisms require a stop before resetting.
For repeated measurements, let the hands settle at zero, confirm the same start and finish references, and keep a written record of the distance, elapsed seconds, scale reading and units. Recording the raw time makes it possible to recalculate the rate if you later discover that the course was a fraction or multiple of a kilometre or mile.
When is a chronograph tachymeter useful?
The scale is useful when the event has a known distance or a repeatable single-unit task and finishes within its operating range. Typical examples include estimating vehicle speed over a measured course, cycling speed over a marked kilometre, or theoretical production capacity for a standardized operation.
It is less suitable when the distance is uncertain, the event lasts several minutes, the start and finish cannot be observed consistently, or the rate changes significantly during the interval. In those cases, a GPS device, calibrated instrument or ordinary stopwatch with a written calculation may provide more appropriate information, depending on the required precision.
Key takeaways for using the scale correctly
- Identify the chronograph seconds hand and the model’s pusher sequence from the manual.
- Reset the stopwatch hands to zero before timing.
- Use a measured one-kilometre or one-mile course for a direct reading.
- Start and stop at clear markers, then read the number opposite the chronograph seconds hand.
- Interpret the number as km/h, mph or units per hour according to what was timed.
- Multiply or divide proportionally for distances other than one unit.
- Keep conventional measurements within the scale’s normal under-60-second range.
- Record the result before resetting and treat it as an approximate average.
Frequently Asked Questions
Can I use a tachymeter at night or in low light?
Only if the chronograph seconds hand and its scale can be distinguished clearly enough to start, stop and read them. Luminous paint on the hands does not guarantee that the printed tachymeter graduations are illuminated, so use a separate timing method when the scale cannot be read reliably.
Does a tachymeter need a mechanical chronograph movement?
No. The calculation is independent of whether the stopwatch is mechanical, quartz or another type of movement. What matters is that the watch provides an elapsed-seconds indication and a scale calibrated for the relevant interval.
Can I use the scale to calculate fuel consumption?
Not directly. A tachymeter converts elapsed time for one distance or task into a rate; fuel consumption also requires the quantity of fuel used, so it needs a separate volume-and-distance calculation.
Recommended Free Tools
Why do some tachymeter bezels start at 400 or 500 instead of 60?
The printed range reflects the shortest interval the particular scale is designed to represent and the graduations chosen by its maker. Read the model’s scale as supplied rather than assuming every tachymeter uses identical endpoints or spacing.




