What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
Do not swim with a Rolex Submariner ref. 1680 unless a qualified vintage-watch specialist has recently inspected it and recorded a passed pressure or vacuum test. The reference was designed for 200 metres (660 feet) when introduced, but that was a new-watch design rating. A surviving 1680 may have aged gaskets, a replaced crown, crystal damage, worn threads, corrosion or service parts that change its sealing performance. The original specification cannot prove that an individual watch is watertight today.
Before any immersion, have the crown and tube, acrylic crystal and gasket, case-back seal and case sealing surfaces examined. Replace suspect seals or damaged parts, then require a documented test performed after the work. A screw-down crown, clean appearance or the words “200 m” on a reference guide are not substitutes for current testing.
As an Amazon Associate I earn from qualifying purchases.
Can I swim with a Rolex Submariner 1680?
Only when the particular watch has passed a recent professional pressure or vacuum test after inspection and any necessary seal replacement. An untested vintage 1680 should be treated as unsuitable for swimming, even if its crown screws down normally and the case looks excellent.
The ref. 1680 is now a decades-old watch. Every opening for servicing, crystal work or crown replacement creates an opportunity for a gasket to be reused, pinched or contaminated. Case wear, corrosion and scratches at a sealing surface can also prevent a seal from working. Water resistance therefore belongs to the condition and service history of the individual watch, not simply to the reference number.
Popular on Amazon
- VERIFY YOUR WATCH MODEL & MEASURE THE CORRECT SIZE USING A RULER – Watch Parts Are Model and Size Specific. Please Verify Compatibility Before Purchasing.
- Crystal Specifications: Replacement plastic watch crystal designed for Rolex Submariner watches with a width of 30.30mm. Magnification: 2.5x, compatible with 25-127, 1680, and other models. Ensure correct fit before purchasing.
- High-Quality Material: Made from premium plastic, this crystal maintains clear visibility and water resistance for your Rolex Submariner, matching the specifications required for optimal performance.
- Accurate Fit: Engineered to fit Rolex Submariner watches with plastic crystals. Double-check the width (30.30mm) and model compatibility to ensure proper fit and performance.
- Compatibility Reminder: This plastic crystal is suitable for various Rolex Submariner models. Please verify your watch model and crystal width before buying to ensure compatibility with your watch.
“Swimming” also covers different levels of exposure. A brief splash at the pool is less demanding than surface swimming, and both are far less demanding than repeated diving. Without a documented test, the prudent choice for all three is to keep the watch dry.
What water-resistance rating did the ref. 1680 originally have?
The historical rating was 200 metres (660 feet), not the 300-metre figure shown on modern Submariner pages. Rolex’s historical account places the Submariner Date at 200 metres when introduced in 1969 and records an extension to 300 metres in 1979. A reference guide from Bob’s Watches dates approximate ref. 1680 production to 1967–1980 and lists the model at 200 metres/660 feet.
| Fact | What it means for a 1680 owner |
|---|---|
| 200 m (660 ft) | Historical Submariner Date specification associated with the 1680 era and the model’s original design rating. |
| 300 m (1,000 ft) | Rolex’s later Submariner Date rating after the 1979 extension; it should not be copied onto a vintage 1680. |
| Approximately 1967–1980 | Production range commonly given for the ref. 1680; individual watches can contain later service parts. |
Metres in a specification describe pressure a new, correctly assembled watch was designed and tested to withstand. They do not describe the pressure tolerance of a particular case after decades of use. The distinction is especially important when a current Submariner page describes later models with a Triplock crown and 300 m/1,000 ft waterproofness: those specifications belong to later watches, not automatically to a ref. 1680.
Why does the original rating not prove a surviving 1680 is waterproof?
Water resistance is a system of mating surfaces, seals and correctly tightened components. Age hardens elastomer gaskets, while repeated opening can leave a seal displaced or a sealing groove dirty. Polishing can reduce a shoulder that a gasket needs, and corrosion or a scratch can create a path for water. A replacement crown or tube may also alter the configuration from which the watch originally received its rating.
Rolex describes factory testing in hyperbaric equipment and says diver’s watches receive a 25 percent testing safety margin above their rated pressure. That process applies to the watch being manufactured or serviced under controlled conditions; it does not retest an owner’s vintage watch after years of wear, case work or parts changes.
Also popular on Amazon
- VERIFY YOUR WATCH MODEL & MEASURE THE CORRECT SIZE USING A RULER – Watch Parts Are Model and Size Specific. Please Verify Compatibility Before Purchasing.
- Compatibility: Fits Rolex Submariner models 1680 with reference #25-127.
- Designed for a designed for a great fit: Verify the size, color, and model compatibility with your specific watch before purchasing to Designed for a designed for a great fit and avoid returns or exchanges.
- Compatibility Check: Double-check your watch's requirements and compatibility details to confirm the product meets your needs. This will help you avoid any issues with returns or exchanges.
- Functionality: Ideal for replacing scratched or damaged crystals, restoring original appearance.
Rolex’s service guidance says servicing is intended to maintain precision, reliability and waterproofness throughout a timepiece’s life. In practical vintage-watch guidance, the necessary sequence is to renew appropriate gaskets, assemble the case correctly and perform a pressure check before immersion. A visual inspection alone cannot establish the result.
Which parts of a 1680 must be inspected?
Crown, tube and threads
Early 1680 examples used a Twinlock crown. Later production and service examples may show Triplock systems, so crown type is not a stand-alone way to date a watch. The crown, tube, threads and their sealing surfaces must be assessed on the actual example, including whether a replacement is correctly fitted and whether the crown reaches its proper seated position.
Acrylic crystal and crystal gasket
The distinctive acrylic “top-hat” crystal is identified as Rolex part 25-127. The crystal is not merely cosmetic: its gasket and the crystal’s seating area form part of the water barrier. Rolex technical service information warns that a scratch in the crystal seating area or the corresponding case wall can create a leak. Cracking, crazing or damage around the Cyclops deserves attention, but appearance alone cannot determine whether the seal is sound.
Any crystal removal or replacement changes the sealing assembly and should be followed by professional testing. A crystal that looks correctly installed is not evidence that it has compressed its gasket evenly.
Case-back and other gaskets
The case-back gasket and other seals are consumable parts. A gasket listed as compatible with a 1680 case may be a non-original replacement; compatibility does not prove that the material, fit, installation or sealing surfaces are suitable for immersion. The watchmaker must inspect the grooves, remove contamination, lubricate or replace seals as appropriate and verify the assembled case under test.
Also popular on Amazon
- VERIFY YOUR WATCH MODEL & MEASURE THE CORRECT SIZE USING A RULER – Watch Parts Are Model and Size Specific. Please Verify Compatibility Before Purchasing.
- Quality Material: Made from premium plastic, this crystal maintains clear visibility and water resistance for your Rolex Submariner, matching the specifications required for optimal performance.
- Accurate Fit: Engineered to fit Rolex Submariner watches with plastic crystals. Double-check the width (30.30mm) and model compatibility to ensure proper fit and performance.
- Compatibility Reminder: This plastic crystal is suitable for various Rolex Submariner models. Please verify your watch model and crystal width before buying to ensure compatibility with your watch.
- Aftermarket Product: This is an aftermarket/generic replacement plastic crystal made to exact specifications. It is designed to replace the existing crystal and maintain the functionality and appearance of your Rolex watch.
What pressure test should be completed before swimming?
Ask for a documented pressure or vacuum test performed after inspection and any repair. A qualified technician may first use a dry test to identify whether the sealed case changes pressure, then use a wet or bubble method to locate escaping air when the equipment and watch condition permit. The exact method varies by workshop, but the meaningful outcome is a recorded pass for that watch after the work.
Request documentation that identifies the watch, test date, method and pass/fail result, along with the seals or components replaced. If a test fails, the watch should remain out of water until the leak source is corrected and the case is tested again. A test performed before a crystal, crown or case-back is removed cannot certify the watch after that work.
What exposure is reasonable for an untested or tested 1680?
| Situation | Appropriate decision | Reason |
|---|---|---|
| No recent test record | Keep the watch dry. | The historical 200 m rating cannot establish present sealing. |
| Visual inspection only | Keep the watch dry. | Gaskets and microscopic leaks cannot be cleared by appearance. |
| Passed test, but crystal, crown or case-back subsequently opened | Test again before immersion. | Opening the case changes the sealing assembly. |
| Passed post-service test with documented result | Follow the technician’s stated limits; surface swimming is the least demanding immersion. | Current condition, not the reference number, governs risk. |
| Repeated diving or commercial-water exposure | Obtain specific advice from a specialist and maintain a current test record. | Vintage parts, wear and intended exposure may exceed a routine recreational use case. |
Even a passed test is a snapshot. It does not convert a vintage 1680 into a modern 300 m watch, and it does not authorize immersion after a new impact, crystal change or crown problem without reassessment.
What should I do before taking a 1680 into water?
- Ask for the last test record. Note the date, method and result. If no document exists or the record is stale relative to the planned exposure, assume the watch is untested.
- Use a qualified vintage Rolex watchmaker. Request an inspection of the crown, tube, threads, crystal, crystal gasket, case-back gasket and every sealing surface.
- Correct the sealing system. Replace aged or suspect gaskets and repair or replace damaged components or surfaces identified during inspection.
- Have the assembled watch tested. Require a passed pressure or vacuum test after the work, with the result recorded for that watch.
- Match exposure to the result. Follow the technician’s advice and avoid treating the original 200 m figure as permission for any activity when the watch’s current condition is unknown.
- React immediately to condensation. If moisture appears under the crystal and does not clear promptly, stop wearing the watch in water and arrange professional service; persistent condensation is a leak warning.
Which crystal fits a Submariner 1680?
The reference-specific search term is “Rolex Submariner 1680 25-127 acrylic crystal.” The 25-127 designation identifies the familiar acrylic crystal associated with the ref. 1680, and replacement listings may describe it as a “25-127 Crystal Plexi for 1680.” A part listing is not an installation instruction or a waterproofness guarantee.
Crystal fitting requires correct seating, an appropriate gasket and inspection of the case wall. Have the work performed by a qualified watchmaker, then obtain a pressure or vacuum test. Do not infer water resistance from a crystal’s visual profile, its part number or the fact that it is marketed as compatible.
Also popular on Amazon
- For PLASTIC ACRYLIC PLEXI WATCH CRYSTAL FOR ROLEX SUBMARINER WATCH 25-127 OR 1680
- Replacement plastic acrylic plexi watch crystal designed for Submariner watches models 25127 and 1680.
- material clarity and protection for your Submariner timepiece.
- Keep your timepiece performing at its best with dependable replacement watch parts.
- Please confirm your watch model and compare the product photos and specifications before ordering to ensure compatibility.
How should two vintage 1680s be compared for swimming?
Reference numbers and dial appearance are secondary to evidence about the sealing system. When deciding between watches or evaluating one you already own, compare these points in order:
- Test evidence: the date, method and pass result of the latest pressure or vacuum test.
- Crown and tube: Twinlock or Triplock configuration, thread condition and documented service work.
- Crystal assembly: condition of the acrylic crystal, its gasket and the seating area.
- Case and back: signs of polishing, corrosion, scratches or damage where seals contact metal.
- Parts history: originality versus aftermarket or later service replacements, with installation records.
- Intended exposure: occasional splash, surface swimming or repeated diving.
A watch with more original parts is not automatically safer in water than one with correctly installed service parts. Conversely, a clean-looking, highly original example without a current test record should not be immersed.
Is there a known failure rate for surviving 1680 watches?
No reliable published statistic establishes a leak or failure rate for the surviving ref. 1680 population. That means a percentage-based reassurance would be invented. The defensible decision comes from the historical specification, the condition of the actual sealing components and a documented test after service.
PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteThis evidence also explains why two watches from the same production period can deserve different treatment. One may have a recently serviced case and a passed test; another may have an aged crystal gasket, a worn tube or unknown previous opening. Their shared reference number does not make their water resistance equal.
What is the bottom line for owners?
The Rolex Submariner 1680 was historically rated to 200 m (660 ft), but that rating describes the design when new. For a vintage example today, swimming is appropriate only after a qualified specialist has inspected the crown and tube, crystal and gasket, case-back seal and sealing surfaces, replaced suspect parts and documented a passed pressure or vacuum test. Until that record exists, keep the 1680 out of the water.
Also popular on Amazon
- For SWISS MADE ACRYLIC CYCLOP WATCH CRYSTAL 25-127 FOR ROLEX SUBMARINER 1680
- Acrylic watch crystal 25127 is designed specifically for Submariner 1680, ensuring a precise fit and quality replacement.
- Swissmade acrylic material durability and clarity, maintaining the authentic look and performance of your timepiece.
- Keep your timepiece performing at its best with dependable replacement watch parts.
- Please confirm your watch model and compare the product photos and specifications before ordering to ensure compatibility.
Frequently Asked Questions
Can I use the 300 m rating shown on a modern Submariner page for my 1680?
No. The 300 m/1,000 ft figure belongs to later Submariner Date models after Rolex extended the rating in 1979. A ref. 1680 should be evaluated using its historical 200 m design rating and, more importantly, its present condition and test record.
Does fitting an aftermarket gasket automatically make a 1680 unsafe?
Not automatically. A compatible replacement can be part of a proper service, but material, dimensions, installation, sealing-surface condition and the post-service test determine whether the assembled watch is suitable for immersion.
Free tools Windows power users keep installed
One-click scans. No signup required.
What information should a watchmaker put on a water-resistance record?
Ask for the watch identification, test date, test method, pass or fail result and a note of seals or components replaced. The record should relate to the assembled watch after the latest work, not to an earlier test before the case was opened.
What should I do if the crystal fogs after a swim?
Treat persistent condensation as evidence of a possible leak. Stop exposing the watch to water and arrange professional service promptly rather than trying to dry it with heat or assuming the moisture will resolve on its own.




